- The MATADOR 8 ceiling systems are beautiful in
their modern simplicity. They allow you to obtain a variety of
designs and rich decorative effects though the use of the many
finishes and colour shades available.
- They are easy to maintain. The light weight
strips are washable, repaintable and readily demountable making
services and ducts accessible.
- Their sturdy finish resists the most trying
weather conditions as well as chemical vapors, making them useful
both indoors and outdoors.
- The acoustical qualities have been tested
according to the acoustic chamber methods and the results show a
high performance in sound absorption.
- The MATADOR ® 10/100/150/200/300 consists of
aluminium strips with a thickness of 0.5/0.5/0.5/0.6/0.7mm,
respectively, a height of 15mm, and 20m recessed gap together with a
width of 80mm/130mm/180mm/280mm, provide a 100mm/150mm/250mm/300mm
module ceiling when erected.
- The strips are stove enamelled polyster painted
in the basic standard white colour. Special colours can also be
supplied to RAL.
- These ceilings can be supplied in both plain and
perforated. The perforated type consists of 1.1mm/1.5mm/1.8mm
perforation holes with a 0.2mm layer of non-flammable black textile
bonded to the concealed surface of the perforated units using a
non-water based glue allowing for wet cleaning.
Schools & Colleges
In preparation for installation, mark
the required finished ceiling level on one of the area perimeter
walls and fix the edge trim to it.
The position of the wire hangers are
marked on the structured soffit and suspended from anchors, taking
care not to exceed a distance of 1600mm between hangers along the
The carriers are then hung to the
wire hangers using adjustment clips to allow accurate ceiling level
Carrier splices join the carriers by
screws at the joints.
Panels are then slid into place by
clipping them to the carriers.