The MATADOR® cell grid metal ceiling systems are both decorative and functional.

Their sturdy finish resist trying weather conditions making them useful indoors and outdoors.

They provide for a wide choice of lighting systems and other electrical and .clipped intmechanical services in a simple and economical way.

The grid 40, 50 PYRAMID are open cell eggcrate systems constructed from punched aluminium U or Y blades of 0.5 mm thickness assembled together from 0.6×0.6m square panels in a wide variety of cell sizes to form one until over the whole ceiling area.

These blades are stove enamelled in the basic standard white. Special colours and mirror finishes could also be supplied. Standard cell sizes are 50×50, 75×75, 86×86, 100×100, 120×120, 150×150, 200×200, 250×250, 300×300.

Typical Areas of Application

  • Shopping Malls
  • Exhibition Centers
  • Restaurants
  • Supermarkets
  • Corridors
  • Halls

SYSTEM

In preparation for installation, the ceiling area is first measured and then divided up so that the 1.8m long carrier blades can be placed at specific distances of 1.2m.

The position of the wire hangers are marked on the soffit taking care not to exceed 0.6m along the carriers.All carrier clips should be aligned accurately.

The height of the carriers adjacent to the wall and the edge trims should be corrected first, then the remainder levelled.

The carriers are then joined by the 1.2m long and 0.6m long crossbars. Finally, 0.6×0.6m modules are formed for the panels to be clipped into.

 
 

Home   |   About us   |   Our Products   |   Technical Specifications   |   Our Projects   |   Contact us

powered by tiara-adv.com